Strike Industries announced today the release of their new multidirectional picatinny rail cover with cable management (6-pack). It “utilizes the patent pending SI Cable Management System (CMS) function which enables…storage of excess wire from a weapon light or any other cabled accessories.”
Multidirectional Picatinny Rail Cover with Cable Management. [Photo courtesy of Strike Industries]
More about it
Protect your Pic rail from damage and protect your hand or thumb from sharp Pic rail edges. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, this simple and cost-effective solution for messy wires gives you a way to route and/or contain loose wire up to 3.5mm (0.14”) diameter inside the cover cavity. Cables can be routed alongside the Pic rail, alongside, U-shape, Z-shape or across to the other side.
Cable Management. [Photo courtesy of Strike Industries]
Designed to be a low-profile (9.43mm (0.37”) height) and used in any orientation, this cover protects your hand or thumb and has a textured surface which gives the shooter more control while handling or firing of the weapon.
Rail Cover. [Photo courtesy of Strike Industries]
Made of durable and lightweight SI PolyFlex material, the cover only uses two (x2) Pic rail sections making it a compact and quick upgrade for the shooters hands while organizing and routing cables just about any way you want on a Pic rail. Available in a 6-pack, the Strike Multidirectional Picatinny Rail Cover with Cable Management will accessorize multiple Picatinny rails or weapons to not only add more weapon control but look good with wire management that is a quick installation and removal.
Package Contents:
Product Features
Add better weapon manipulation control
Built-in Cable Management System w/ excess wire storage (patent pending)
Cables can be routed: alongside, U-shape, Z-shape, or across
Protect Picatinny rails from damage and hand/thumb from sharp edge
Low-profile design to minimize snags (9.43mm (0.37”) height)
Accommodate wires up to 3.5mm (0.14″)
Quick installation and removal
Made from durable and lightweight SI PolyFlex material
Rail Cover with Cable Management. [Photo courtesy of Strike Industries]
Compatibility: 1913 Picatinny
Warning: 90-degree cable route will damage most wires because of sharp Picatinny rail edges
DRD Tactical recently announced the release of their newest pistol, the MFP-21. It is not expected to release until January 11th, 2022, but you can pre-order it now.
MFP-21 .300 Blackout. (Photo courtesy of DRD Tactical)
More about it
The MFP-21 Pistol features a newly designed lower with an integrated picatinny rail on the butt plate which allows you to mount a brace, sling or other accessories. Our patented technology allows you to run without the need for a buffer tube, giving you better maneuverability in close quarters or tight spots.
Caliber: .300 Blackout
Barrel: 8” QD barrel with 1/8 twist
Finish: Hardcoat Type III Anodizing
Muzzle Brake: 2-Flute, 5/8-24 threaded end
Charging Handle: Non-reciprocating left side charging handle
Controls: Ambidextrous Safety Selector & Bolt Catch *NY or CA compliant version are NOT available.
MFP-21.
MSRP for the MFP-21 is $2,500.
About the Company
DRD Tactical was founded in 2010 after being challenged to build a 7.62mm rifle that fit in a briefcase to meet the whitepaper request for the Clandestine Sniper Rifle project listed by Joint and Special Operations Program. After two years of design and testing, DRD Tactical went into production on the PARATUS. In designing the PARATUS, two patents were developed – quick barrel change and internal recoil system. These two patents would become the backbone of future rifles developed for DRD Tactical. DRD Tactical is built on a passion for building handcrafted American made firearms and developing innovative solutions. This isn’t a mass production operation where parts can be overlooked. We ensure maximum power, extreme range, and precise accuracy from start to finish by building each handcrafted rifle one at a time.That level of attention to detail through the manufacturing process ensures each firearm created is a masterpiece.
Like an artist’s signature on piece, DRD Tactical leaves its signature on every firearm built. The unique sculpting of the magwell in addition to the finger rest grooves machined above the trigger and hammer pins gives DRD Tactical its true authenticity.
The product offering expanded to include long distance sniper rifles, AR patterned rifles as well as machine guns. We set a new standard for covert, concealable, accurate firearms…. Discreet. Reliable. Precise.
“We wanted our first pistol optic to be geared toward everyday carry for self-defense,” said Rick Callihan, Ameriglo founder. “The new Haven red dot sight offers intuitive, real-world features built to perform in high-stress personal defense situations.”
Haven Red Dot Sight. [Photo courtesy of Ameriglo]
About the Haven Red Dot Sight
Designed from the ground up to fit the personal defense needs of American gun owners, the Haven is available with a 3.5 or 5.0 MOA dot, or as a Carry-Ready Combo which includes optic-compatible iron sights for the Glock MOS system. Using the proven Trijicon RMR footprint, the Haven red dot is ready for immediate installation on today’s most popular optics-ready pistols.
The combination of the Haven’s large window, bright red dot, and high-visibility vertical post on the rear deck create an immediate and intuitive aiming point for the shooter. The Haven is guaranteed to survive firing and recoil from today’s most powerful handguns due to its advanced electronics and enhanced opto-mechanical design. Developed for personal defense, the Haven is compatible with the most common IWB/OWB holsters used for concealed carry.
Haven Red Dot side-loading battery. [Photo courtesy of Ameriglo]
The Haven’s convenient side-loading battery compartment means there’s no need to re-zero the red dot when the battery is changed. Simply eject the old battery and slide in the new one for fast and easy replacement – not that batteries will need to be changed very often at all. The Ameriglo Haven runs on a single, common, CR2032 battery, which can last up to two years on the Low setting and one year on a Mid/High setting. Battery life is conserved thanks to the Haven’s Power Protect feature, which offers a 12-hour runtime and a 12-hour, motion-activated auto-on.
The Haven features 11 brightness settings, including 2 night-vision compatible options. The optic’s proprietary Carry-Loc mode fixes the illumination at the user’s desired setting and prevents unintentional button presses. Designed with precision-engineered adjusters for windage and elevation adjustments at 1 click per 1 MOA, the red dot has an adjustment range of +/- 45 MOA.
Haven Red Dot perfect zero adjusters. [Photo courtesy of Ameriglo]
The Haven is compatible with optics-ready pistols including the Glock MOS (excluding Slimline models), Smith & Wesson’s C.O.R.E., Springfield Armory’s OSP, Beretta APX RDO, Canik TP9SFX, FN 509 MRD & Tactical Series/FNX, CZ-P10 optic compatible models, the Walther Arms Q4/A5/PDP, and many more.
Features
Side-loading battery
Intuitive controls
Reliable construction
Power protect
Industry-standard footprint
Perfect zero adjusters
Rapid target acquisition
About Ameriglo
For 20 years, Ameriglo has been designing and manufacturing self-defense sights that offer proven reliability, absolute accuracy, and day-and-night illumination in the highest-stress environments. Ameriglo offers the largest selection of self-defense sights on the planet, so customers can find the perfect solution for accurate, reliable precision in every situation.
HatsanUSA recently slot88 announced the release of their first .50 caliber air rifle, the PileDriver. They say the PileDriver is designed exclusively for high-powered hunting applications.
The PileDriver. (Photo courtesy of HatsanUSA)
From the Company
The PileDriver is Hatsan’s first .50 caliber air rifle, and the market’s most powerful production PCP rifle. Capable of producing over 800 ft-lbs. of energy in 50 cal, it is also available in a 700+ FPE-generating .45 caliber model. Although this rifle utilizes a 33-inch barrel, its bullpup design keeps the maximum length under 4 ft. The side lever cocking mechanism is easy to reach and operate. A 480cc carbon fiber bottle fills to 4350 PSI and will provide up to 6 high-powered shots on a single fill. The PileDriver’s unique, patented hammer design eliminates traditional steel coil springs in favor of a smoother, easier-to-cock, gas piston mechanism. This top-loading single-shot rifle also features an extra-large loading port that will accommodate ammo up to 34mm in length.
The all-weather synthetic bullpup stock features an ergonomic pistol grip with textured grip surfaces for enhanced feel and control. The soft rubber buttpad is both elevation and angle adjustable to ensure controlled recoil and a comfortable fit. An elevation adjustable cheek rest ensures proper sight alignment with any optic. The rifle’s 14-inch-long scope rail is cut to accept both Picatinny and 11mm Dovetail mounts, offering plenty of real estate for a wide variety of optics. Three Picatinny accessory rails are attached around the air bottle for added customization. The high-strength steel barrel is precision rifled for long-range accuracy, and the absence of a shroud allows for the use of sabot rounds, further expanding one’s ammunition options.
MSRP: $1,199.99
PileDriver Features
Genuine bullpup design, manual loading high-powered PCP air rifle
Available in .45 and .50 caliber
Long cocking lever for easy cocking action
Precision rifled steel barrel for long-range accuracy
480cc carbon fiber air bottle with 300 BAR (4350 PSI) fill pressure provides up to 6 high-powered shots
Ergonomic synthetic thumbhole bullpup stock
Locking elevation adjustable cheek rest
Elevation and fit angle adjustable soft cushioned butt pad
Combo Picatinny and 11mm Dovetail optics rail
3 Picatinny accessory rails mounted on air bottle
Includes quick-fill nozzle
.50 Caliber PileDriver. [Photo courtesy of HatsanUSA]
PileDriver Specifications
.45 Caliber
Max Energy: 700+ Ft-lb
Number of Shots: 4-6
.50 Caliber
Max Energy: 800+ Ft-lb
Number of Shots: 3-5
Air Cylinder Volume: 480cc
Fill Pressure: 300 BAR (4350 PSI)
Tactical synthetic pistol grip stock with adjustable cheek rest and butt pad
Overall Length: 46.5”
Barrel Length: 33”
Weight: 10.4 lbs
The PileDriver. [Photo courtesy of HatsanUSA]
About HatsanUSA
HatsanUSA is the exclusive distributor of Hatsan airguns and Escort firearms in the U.S. Recognized for craftsmanship and precision performance, Hatsan products provide an exceptional shooting experience. The brands are purpose-driven and renowned for outstanding power, performance, reliability, and value. Hatsan takes pride in its vertically integrated manufacturing process, which enables it to maintain the highest levels of quality, workmanship, and a competitive advantage.
If a new vertical holster system is on your Christmas list, you may want to check out Galco Holster’s VHS 4.0. They say their 4.0 shoulder holster has a new design.
Vertical Holster System 4.0. (Photo courtesy of Galco Holsters)
Galco’s Description
Galco’s original VHS (Vertical Holster System) was field-proven across the globe from Afghanistan to America. Thousands were used by US military personnel fighting in Iraq and Afghanistan. Countless others are in use by US and international law enforcement, being particularly popular among police helicopter pilots. The VHS also provides an alternative for those who want the concealment of Galco’s Miami Classic but prefer the traditional vertical carry style.
Now, after over a decade of experience with the VHS, Galco has improved it further. The VHS 4.0 brings a reshaping/redesign of the harness straps, replacement of harness screws with a key-hole harness fastener attachment, and the addition of an innovative new tie-down system.
A key component of the VHS 4.0 shoulder system is its spider harness. All four points of the spider harness can pivot independently and are connected by our clover-shaped, trademarked Flexalon swivel back plate. This, along with our patented swivel connectors, results in a perfect fit and lasting comfort for virtually all body sizes and shapes.
The 2.75″ wide harness straps on the VHS 4.0 have been recontoured to enhance both comfort and concealment. The VHS 4.0 also features Galco’s improved key-hole harness fastener system that replaces the earlier screw-and-post system, resulting in greater security, ease of assembly, and greatly reduced chance of fastener loss.
VHS 4.0. (Photo courtesy of Galco Holsters)
The VHS 4.0 also introduces a new tie-down system that is simple to use, compact and concealable, and fully ambidextrous.
The VHS 4.0 comes complete with vertical holster, harness, ammo carrier, tie-downs and a set of harness fasteners. Fully modular, optional accessories and components for the VHS 4.0 may be purchased separately.
Double speed loader carrier for revolvers. (Photo courtesy of Galco Holsters)
Whether you patrol metropolitan America on the ground or from the air, exercise your Second Amendment right to bear arms, or stalk the hunting fields of the world, the VHS 4.0 will help you and your handgun stay secure in an often-dangerous world.
Made for semiautomatic pistols and revolvers, the VHS 4.0 is ambidextrous and available in tan or black finish.
Shoulder Holder Features
Premium Steerhide construction
Vertical handgun carry
Vertical double magazine carrier with secure flaps
Double speedloader carrier for revolvers
Converts for right or left-hand use
Comfortable 2.75″ wide harness with swiveling Flexalon backplate
Accepts optional accessory attachments
Includes tie-downs for both holster and ammo carrier
Samson Manufacturing recently introduced their Rapid Precision scope mount. The mounts, with a 2″ offset feature a lightweight design.
Rapid Precision Mounts (RPM) with 2″ Offset. (Photo courtesy of Samson Manufacturing)
From Rapid Precision
Precision machined from 6061-T6 aluminum, these scope mounts are perfect to mate your favorite optic to your favorite firearm. Integrated into the clamp cross bolts are two steel recoil lugs to eliminate scope base movement during heavy recoil to better maintain zero. The scope ring bases utilize threaded steel inserts to prevent the internal threads from being stripped by the ring cap screws, extending the lifespan of the rings if you decide to change out the optic.
Requires 7/64″ hex wrench for rings and 1/2″ wrench for thumb nuts.
Rapid Precision Mount (RPM).
RPM Scope Mount Features
Lightweight design
Offset mount to achieve proper eye relief
Dual steel recoil lugs integrated into cross bolts
1/2″ steel cross bolt thumb nuts
Threaded steel inserts for ring base
1913 Picatinny MIL-SPEC
Made in New Hampshire, U.S.A.
Specifications
Material: 6160-T6 aluminum
Finish: Type III Class 2 Hard Coat Anodizing
Samson says the 34mm, 35mm, and 1″ rings with 2″ offset will be coming soon.
The new scope mount will cost you $148.95 plus shipping. There were some questions as to the actual weight (what is lightweight?). The shipping weight is listed as 0.95 pounds on their site. The specifications tab lists the 30mm rings with the 2″ offset at 8.4 ounces. Those coming soon will be between 7.0 and 7.2 ounces.
About Samson Manufacturing
Samson Manufacturing is the premier manufacturer of firearms parts and accessories, helping customers find solutions to their needs. Specializing in the AR-15, HK, Kalashnikov and other MSR enhancements, Samson offers free-floating handguards, optic and magnifier mounts, fixed and folding rifle sights and more. Delivering quality and value to the commercial, military, law enforcement and OEM markets since 1994, Samson Manufacturing has what you need, when you need it.
Steiner Optics recently released their Micro Pistol Sight (MPS) Red Dot. They say it’s got 1X magnification offering an undistorted image for both eyes open operation, and it’s compatible with most optic-ready pistols and baseplate adapters on the market.
Micro Pistol Sight Red Dot. (Photo courtesy of Steiner Optics)
More about the new Micro Pistol Red Dot
Steiner brings battle-proven durability and mil-spec ruggedness to pistol red dots with the New MPS (Micro Pistol Sight). All-metal construction and enhanced sidewalls completely seal in the emitter. A recessed window with a metal hood blocks objects from reaching the front lens making this one of the toughest pistol sights ever created.
At 2.05 oz, the MPS is compact and lightweight offering Steiner quality glass and a robust feature set including 8 brightness levels, user-selectable auto-off, and 13,000 hours of battery life.
MPS Micro Pistol Sight. [Photo courtesy of Steiner Optics]
Features
Battle Proven Durability
The MPS boasts an enhanced extra side wall that produces a best-in-class shock rating. The completely enclosed laser emitter is water pressure tight making it reliable in the harshest environments and any weather condition.
Compact Size
Only 58g means the MPS is light and compact. Its short size avoids any “tunnel-vision” while the low weight allows a perfect use
Daylight Bright Dot
8 brightness settings (two night vision) can easily be managed due to the ergonomics of the raised button on the side of the optic. The 3.3 MOA dot allows fast and smooth target acquisition in any condition.
Battery Life
The 13,000 hours of battery life puts the MPS on top of its class and the easily accessible battery compartment allows changing the battery without dismounting the MPS from the gun.
User-Selectable Auto-Off
Users can choose to use the auto-off timer or keep the sight continuously on. If auto off is selected, the sight will automatically shut off after 13 hours.
True 1X
The 1X magnification allows both eyes open operation and complete situational awareness.
Mounting Options
The MPS can be mounted on any gun Docter plate and is compatible with most other manufacturer adaptors available on the market.
For over 70 years, Steiner has made trusted optics for life’s defining moments. The successful pursuit and capture of these moments demand the fast and precise detection, location, and identification of a distant objective. Whether the objective is wildlife, a marine bearing, law enforcement suspects, or military combatant, Steiner products enhance an individual’s most important sense, vision, so that on land or sea –– Nothing Escapes You.
Springfield Armory just announced their new Emissary 1911 pistol variants; the 4.25″ .45 ACP and the 5″ 9mm. They say these bridge the gap between duty and custom handguns.
Emissary 1911 Variants (Photo courtesy of Springfield Armory)
More about the new Springfield 1911 pistol variants
The Emissary blends form and function seamlessly in a firearm built for defense and loaded with custom-grade features. It’s constructed with a forged stainless steel frame and forged carbon steel slide, with a beautiful two-tone finish. The blued carbon steel slide pairs with a stainless steel frame, featuring a distinctive squared triggerguard with additional room for ease of operation with a gloved hand.
The slide’s “Tri-Top” cut gives the Emissary custom styling, while a flattened top strap is finished with 40 LPI serrations to diffuse light and reduce glare. On top, the tritium and luminescent front sight on the Emissary pairs with a Tactical Rack U-Dot rear sight for easy target acquisition in all lighting conditions.
9mm 1911 Emissary U-Dot Sight [Photo courtesy of Springfield Armory]
Inside the slide, the bushingless heavy stainless steel 4.25” or 5” bull barrel delivers maximum accuracy while reducing felt recoil and muzzle flip. In addition, the Emissary’s skeletonized hammer delivers ultra-fast lock times and combines with a solid-body, flat-faced trigger for top-end performance.
4.25″ .45 ACP Bull Barrel [Photo courtesy of Springfield Armory]
The forged stainless frame’s front strap and mainspring housing are wrapped in a grenade-pattern texture for firm engagement in adverse conditions. This is matched with slim line grip panels by VZ Grips machined from G10. Each pistol comes with two top-quality 8-round stainless steel magazines with base pads. MSRP for each is $1,279.
1911 Emissary 4.25″ .45 ACP Handgun (Photo courtesy of Springfield Armory)
“These newest additions to the Emissary line provide shooters with great options for a self-defense pistol with an additional measure of refinement,” says Steve Kramer, Vice President of Marketing for Springfield Armory. “With either the more compact 4.25” .45 ACP or the 5” 9mm, these new Emissary pistols are a must-have for 1911 enthusiasts who demand the best.”
1911 Emissary 5″ 9mm Handgun [Photo courtesy of Springfield Armory]
https://youtu.be/dlOhAz7UMZg
About Springfield Armory
In 1794, the original Springfield Armory began manufacturing muskets for the defense of our young, free Republic. The Armory functioned as a firearms supplier for every major American conflict until 1968 when the government sadly closed its doors. In 1974, nearly two centuries after its inception, Springfield Armory Inc. in Geneseo, Ill. revived the iconic heritage of the Armory to carry on its legacy.
We strive to honor this responsibility as guardians of the original Springfield Armory legacy by manufacturing the highest quality firearms to enable responsible citizens to preserve their right to keep and bear arms in the defense of life, liberty and the pursuit of happiness.
With an unmatched emphasis on craftsmanship, performance and exceptional customer service, our mission is to forge superior firearms and provide the tools necessary to defend individual freedoms and equality for those who embrace the rights and principles secured by our Founding Fathers.
Comp-Tac just released the CT3 Level III retention holster. They say it gives “unparalleled fit, security, and draw speed.”
CT3 Level III Holster in black. (Photo courtesy of Comp-Tac)
About the CT3
The CT3 is a Level 3 holster that uses friction, an ejection port lock, and a hood that must be released before the firearm can be drawn. The CT3 is designed with the intent that a master grip is achieved before fully withdrawing the weapon. This combined with the autolocking ejection port lock and the intuitive self-activated hood system makes this one of the fastest Level 3 holsters available on the market today. This holster is available for fits with lights and in fits without lights.
The CT3 comes with a belt mount and integrated drop offset already assembled, however among the list of additional accessories is also a mid ride belt mount and the QLS Adaptor plate.
“The CT3 is the result of two years of design, testing and partnership between Comp-Tac and multiple departments and members of the law enforcement community,” explained Gordon Carrell general manager of Comp-Tac. “For years, Comp-Tac has been a leading supplier of concealed carry and off duty equipment. We wanted to be able to take the skills that we have acquired and the relationships we have built in the industry to offer a solution for the men and women on the front lines of our law enforcement, military and all users wanting multiple levels of retention.”
CT3 Holster. (Photo courtesy of Comp-Tac)
Key Features
Three levels of retention
Available for fits with lights and without lights
Belt mount is designed to keep the firearm from canting into the wearer’s leg
Allows for a Master Grip before fully withdrawing the firearm
Hood can be released without releasing firearm
One of the fastest draws in the Level 3 market
Very intuitive to use
The holsters are $150.00 and obtainable for specific CZ, Glock, Sig, and Walther models. They are available in a variety of colors.
About Comp-Tac
Comp-Tac Victory Gear is devoted to designing and manufacturing the highest quality concealed carry, competition, tactical holsters and related accessories on the market. Comp-Tac products offer options that make it easy and comfortable to carry a firearm for all our customers: law enforcement, military, shooting sports enthusiasts and responsibly armed citizens. We build with the customer in mind, ensuring speed of manufacturing, quality of product, competitive pricing and superior customer service to support the desire to take responsibility for personal safety, security and recreational firearm use.
CRKT recently released the Clever Girl Kukri fixed blade. There’s a story behind this from its designer Austin McGlaun. This is the third variation in the Clever Girl line.
Clever Girl Kukri, designed by Austin McGlaun. (Photo courtesy of CRKT)
More about the Kukri
During his time stationed at Fort Polk while serving in the military, knifemaker Austin McGlaun was inspired to find new ways to tackle laborious camp chores. And so the Clever Girl Kukri was realized. A fixed blade design that honors the iconic kukri knife, this reimagined version still brandishes a mighty swing despite being more compact than its predecessor. As a member of the CRKT Forged by War program, the Kukri is tough enough to stand the test of the battlefield—and whatever else Mother Nature might throw your way.
With years of military service under his belt, knife designer Austin McGlaun knows exactly what kind of tools help you stay on top. Applying his broad experience of combat, Austin is recognized for his contributions to the CRKT Forged by War program, where his designs span defense, to everyday purpose. The Kukri carries the torch as the third knife in the Clever Girl series and pays homage to the time-honored kukri blade. In addition to its famed military use, the traditional Kukri was once hailed as the go-to for chopping firewood, digging, cutting through tough meat, and conquering farm chores.
The Kukri fixed blade. (Photo courtesy of CRKT)
Mirroring the original’s versatility, the reimagined Kukri performs dutifully. Equipped with a fixed, high-performance 7.75” SK-5 carbon steel blade and sturdy G10 handle, its design paves the way for a sturdy strike. Featuring a wider upper chest and sharp inward curve towards the blade’s belly, the Kukri is a hard hitting tool that dominates the great outdoors.
When not being used for chopping wood, digging into the earth, or setting up your camp, the Kukri can be transported with ease. Designed with a belt loop on its sheath and also featuring a lanyard hole for a drop leg carry, however you choose to pack it, it’s always ready for transport.
Features
High-Performance Steel: SK5 carbon steel holds an edge well
